Thanks - I've gone ahead and purchased one this morning.
I have a few questions and would be really grateful for help in answering them:
1) What glue can be used to attach the sensor to the expansion tank? I'm looking for a glue that won't compromise the integrity of the tank plastic
2) Is there anyone local to Southampton/Eastleigh who could help me fit this kit?
Many thanks
Matt
I have fitted that system to a 2002TF. Very happy with the results:
I added a low-current-demand LED, which I positioned in the vacant "Transmission Fail" instrument panel position:
I have had a couple of brief False Alarms, only when ascending steep hills & cornering. My wife finds it annoying that it sounds both when ignition turn to 1st position, then again at engine start, but I like that "feature": You KNOW it is "available for duty". To kepp the buzzer & wife quiet, I have added a switch between buzzer and the "output" side of the circuit, so that ONLY the light illuminates when:
1. Wife is in car
2. I have remembered to isolate the buzzer!
Other pictures you might find helpful if you choose the LED route (assuming your car is NOT Steptronic/Stepspeed)
P.S. If you fancy a trip to East Devon (Honiton area), I would be happy to show my set up and offer guidance on how I routed wires, chickened-out of using reversing-light feed and found spare output on fuse box etc.
P.M. me if you need to
John E
