Hi Mark
So I have a faulty ABS Module. I tested with the replacement plugged in and the ‘new’ module communicates with Pscan. 😊 but the ABS light still doesn’t work.
I’ve also tested the BLUE \ RED wire from the ABS module plug through to the ’20 row’ connector above the fuse box and the wire is good.
Incidentally, the faulty ABS module sends a perm +12v out on the BLUE \ RED and the good unit sends +12v for 3 seconds, so that all looks good.
One last question, is it still a BLUE \ RED wire from the other side of the ’20 row’ connector up to one of the two instrument cluster plugs, as I’d like to test this last link next weekend before I look to get the cluster checked out and repaired?