Sign In   Register
  • Page:
  • 1

Topic

Gear Selector Forks Wanted 4 years 7 months ago #191097

I'm looking for a set of Gear Selector Forks for the PG1 gearbox in my 1997 MGF VVC.
This is the assembly inside the gearbox consisting of two steel rods with bronze forks that move the
gears on the shafts to select gears. The important thing is that there ne no/minimal wear on the ends
of the forks where they contact the slots in the synchros and the notches at the base end of the forks where
they are moved/selected when shifting.
My existing forks have damage at the selector end and need replacing.
The complete assembly with the steel rods would be preferred but I will also take individual forks.
Please be willing to post to Canada. :)
I will attach the diagram from Rimmers for more information.
Page URL attached. Either after the entire assembly or #40, 41, 43.
https://rimmerbros.com/Item--i-GRID018884



Thanks, Rich (please PM me with a price if you have the parts)
Attachments:

Please Log in to join the conversation.

Last edit: Post by Rich in Vancouver. Reason: Added pic, fixed typos
  • Page:
  • 1
Time to create page: 0.068 seconds
© 2024 The-T-Bar.com All Rights Reserved. Hosted By SEBS IT