Sign In   Register
  • Page:
  • 1

Topic

WANTED (parts new/ used for MGF) 8 years 6 months ago #163285

New to this forum...
I would appreciate your input/ advice...
Looking to source 421 exhaust manifold, sports Cat, back box with 4 rather than two pipes... 52mm throttle body etc..
The usual old story; trying to do it on a budget...
I know I can just buy one off the shelf, with work done already
Looking to do the work on it myself with my young son, call it bonding, midlife crisis, whatever
If possible a mix of new and old...
looking at Mike Satur stuff, super impressive, but, for me just too expensive...
seen some stuff on ebay but again just not sure about it...
well... rant over...

Please Log in to join the conversation.

WANTED (parts new/ used for MGF) 8 years 6 months ago #163289

:welcome2:

421 manifolds are never going to be cheap. :nonod: .You can get a stainless manifold and downpipe copy, but there is no performance gain.

I think to get a quad exhaust cheaply, you may need to adapt a two pipe. Perhaps buy a Toyo stainless and cut the end pipes off and add a couple of twin finishers.

52mm Throttle bodies do come up regularly on ebay.

Good luck! :broon:
David
:shrug:
The following user(s) said Thank You: jpjohnston

Please Log in to join the conversation.

Last edit: Post by David Aiketgate.

WANTED (parts new/ used for MGF) 8 years 6 months ago #163294

If your going to change the throttle body why not put a 58 mm vauxhall one on these fit on with a little bit of work and only 20 quid on Ebay if you fancy it there's a page on it if you google it.
I was impressed with the result.

Tommy.
The following user(s) said Thank You: jpjohnston

Please Log in to join the conversation.

WANTED (parts new/ used for MGF) 8 years 6 months ago #163295

I've read about this 58mm Vauxhall TB mod but wasn't convinced, the 52mm TB is plug and play.

Home to black Alfa Romeo 159 3.2 V6 Q4 ,green MGF VVC and red MG Maestro T16.

MG - the friendly marque.

Please Log in to join the conversation.

WANTED (parts new/ used for MGF) 8 years 2 months ago #165547

Got the throttle body, pipercross panel air filter. Cybox quad back box. Full service done. The gent I bought the car off told me he got double gaskets put on. I assume the timing belt was done also but not sure!!! Lost contact with the chap. Mike satur wheel hub adapted... Not sure weather to buy 16" or 17" alloys but... Thinking rota grids or JR12's in white... Collecting one of them tomorrow...

HELP!!!
Will this fit my non-VVC 1.8i 16v MGF. She's '98. I asked the seller and was directed here! Unbelievable! Considering hes selling them.

Stainless Steel T-304 Exhaust Manifold and Downpipe designed to fit
MG-ROVER MGF MK1 1.8i VVC 09/1995-2000
1796 CC, 118 HP, 87 KW
1796 CC, 143 HP,105KW

Please Log in to join the conversation.

WANTED (parts new/ used for MGF) 8 years 2 months ago #165548

Apologies to all for not responding to your help... Got no notifications about any response. Just by pure chance I checked tonight. Can't believe that was 3 months ago. Progress is slow!!! On my behalf

Please Log in to join the conversation.

  • Page:
  • 1
Time to create page: 0.114 seconds
© 2024 The-T-Bar.com All Rights Reserved. Hosted By SEBS IT