WANTED MGTF COMPLETE REAR SUBFRAME

WANTED MGTF COMPLETE REAR SUBFRAME was created by dannycutts

Posted 11 years 9 months ago #151805
Hiya

I am after a complete rear MGTF subframe with hubs and suspensionetc :_)

I know MGfnTF Bits has one but its a 600 mile round trip and is a little bit far :-\

I am so far on the south coast its ridiculous so anything nearer would be magic :D

Thanks again :-)

Please Log in or Create an account to join the conversation.


Rendering Error in layout Message/Item: client authentication failed. Please enable debug mode for more information.

Please Log in or Create an account to join the conversation.

Replied by dannycutts on topic WANTED MGTF COMPLETE REAR SUBFRAME

Posted 11 years 9 months ago #151808
Hiya

Already asked if its a complete one :-) Waiting for a reply :-)

Please Log in or Create an account to join the conversation.

The following user(s) said Thank You: dannycutts

Please Log in or Create an account to join the conversation.

Replied by dannycutts on topic WANTED MGTF COMPLETE REAR SUBFRAME

Posted 11 years 9 months ago #151814

Leigh Ping wrote: These might be worth a punt. ;)


Nice :-)

I have filled it out :D
The following user(s) said Thank You: Leigh Ping

Please Log in or Create an account to join the conversation.

Replied by Fatbaldingoldgit on topic WANTED MGTF COMPLETE REAR SUBFRAME

Posted 11 years 9 months ago #151828

dannycutts wrote: Hiya

Already asked if its a complete one :-) Waiting for a reply :-)


They are advertising the rear hubs and calipers separately..so it looks like it's just the bare subframe...

"You can’t be a real country unless you have a beer and an airline – it helps if you have some kind of football team, or some nuclear weapons but at the very least you need a beer"
- Frank Zappa

Please Log in or Create an account to join the conversation.

Replied by bryan young on topic WANTED MGTF COMPLETE REAR SUBFRAME

Posted 11 years 9 months ago #151866
Have you tried Martin Smith, he is in Somerset.

Please Log in or Create an account to join the conversation.

Time to create page: 2.252 seconds