Mileage issue

Mileage issue was created by Fireline

Posted 5 months 2 weeks ago #206838
Hi. Can PSCAN read and write mileage to a digital set of clocks? Before anyone accuses me of nefarious purposes, I have a set of clocks on a car with screen bleed. I can't read the first two digits of the mileage. I would like to get the mileage off these, then write this to a known good set of clocks. Thanks.

Please Log in or Create an account to join the conversation.

Replied by Roverlike on topic Mileage issue

Posted 5 months 2 weeks ago #206839
Mileage in case of MG F and TF cars is written within memory chip in the instrument cluster. This cluster and its electrics is not connected to diagnostic port.
So there is no diagnostic tool which can read or write this information. That can be done with equipment to desolder chip from cluster or read from chip while it is not desoldered on cluster and write it to another chip for another cluster. Also you need to have person who konws where this information is written within the chip.
The following user(s) said Thank You: Fireline

Please Log in or Create an account to join the conversation.

Moderators: pscan.uk
Time to create page: 0.512 seconds