Topic

got a busy weekend ahead of bits and pieces I'm doing on the Tf.

Itinerary is as follows
Replace front discs and pads with new
Replace footwell lighting bulbs with blue multi led festoon bulb
Replace map lights with blue multi led bulbs
Remove dash instrument panel remove orange tint and replace LEDs with super bright blue LEDs and refit
Adjust throttle cable (it's like a switch at the minute ,terrible in slow traffic)
Re bleed coolant system (im pretty sure it needs a bleed as the level is never the same ,head gasket , water pump and cam belt changed just before I bought it and I'm sure there's still air in there)
And finally a much needed wash ,Polish ,Hoover and dash shine

Anyone else got doin any work on there mg this weekend??

You're going to be busy, bet you don't get it all done
Me I'm off to pick up the TF 160 I've bought

mmmmmmmmmmmmmm

plan to do actually expect to get done?

I need to

Change one of the wheels on the ZR from a mk2 ZS alloy with bald tyre for a better condition mk1 ZS alloy prior to an MOT on Monday.

Arrange tax for the F.

I ought to

Repair the wiring for the post car O2 sensor on the ZS in the hope that it stops the MIL coming on and to improve fuel ecconomy.

Replace the N/S/R caliper on the ZS as it is stuck and has killed the pads. doing this I would like to do the disc and the caliper and disc on the other side and fit the braided hoses I've had forever (4 or 5 years).

Work out why the steeper motor isn't working on the F (isn't stuck/dirty).

And then there are the

I would like to's

but I off to bed in a couple of hours so don't have time to type the massive list.

I have a busy one this weekend, I'm the organiser for the MG Car Club of Tasmania State Concours d'Elegance, Annual General Meeting and Annual Awards Dinner on Saturday and then the cook for the recovery breakfast for about 60 people on Sunday. Photos to follow sometime after I recover.

Craig

Sounds a great do
Hope breakfast is not too early

Forrester - good luck with colecting your tf , hope all goes smoothly.

tc - and I thought my car had issues !!

Bacchus - have fun mate!! .. what id give to live in oz been a dream of mine for as long as I can remember . Shame ill never have the £££ to do it.

Forrester wrote: wrote:

Sounds a great do
Hope breakfast is not too early

I start service at 08:00hrs, if you are late its tough titties, the bacon will be gone and the eggs will be over cooked.......lol

CR41G wrote: wrote:

Forrester - good luck with colecting your tf , hope all goes smoothly.

tc - and I thought my car had issues !!

Bacchus - have fun mate!! .. what id give to live in oz been a dream of mine for as long as I can remember . Shame ill never have the £££ to do it.

It's a bit like "the hotel California" but without the yanks.....lol

CR41G wrote: wrote:

tc - and I thought my car had issues !!

and don't get me started on the Maestro...................

Its a bit boring not having a tinker car so I'll be...

Xmas Shopping with Twins & Wife
Doing college work.

That's it, the usual boring middle aged man things.

bensewell wrote: wrote:

Its a bit boring not having a tinker car so I'll be...

Xmas Shopping with Twins & Wife
Doing college work.

That's it, the usual boring middle aged man things.

glad I had today off work apparently all the roads where blocked up round here by half 6 cuz of all the losers agueing overs tvs that are ten quid cheaper than normal!! Just took me an hour to do a ten mile round trip to the motor factors and back to pick up my discs and pads!!
I wished they would stop all this yank shit and keep it over the pond with douche bags!!

On the plus side I got my discs and pads at a steal .. no thanks to black friday but because the manager of the motor factors is an old friend and put it through as a trade deal. So I got ferodo pads and mintex discs for a nats bollock under 40 quid ...regular price 60 quid so well happy with that

Had a break from the rain this afternoon so did a few bits

Firstly I adjusted the switch like throttle and now I'm kicking myself I didn't do it sooner at first I thought I was having trouble with the clutch bite being to high but after reading a few posts on this forum and others I found the cause to be a very loosely adjusted throttle cable and even better it's simple fix that doesn't cost a dime!! From the picture you can see how much I've had to adjust the screw (lighter rust colour on the thread )

Made the world of a difference , instant throttle response and no longer like an on off switch which caused me no end of bother in slow moving crawling traffic cues , basically it either stalled or over revd it because of to much play in the pedal really was a pain but all now cured I the matter of seconds - if you have the same symptoms or feel like the throttle is sticking try this first I can't believe how different the car feels and drives now , always the simplist things get over looked

Then decided to change the footwell lights and rear view mirror map lights to the multi blue led ones that arrived the other day looks pretty good and there actually brighter than the stock yellow bulbs

In the day light with camera flash

And when it went dark out ... Looks better in the flesh as they illuminate the hole cabin blue but anyway you get the idea

Hopefully the dash board blue LEDs arrive tomorrow so can get rid of that wank yellow glow and have some more nice blue dials!!

More to follow tomorrow as I go about changing brakes , bleeding cooling system and hopefully blue dash !!

Just had a thought that while doin the brakes I may aswell paint the calipers red , just so happens I have a tin of red caliper paint sat in the shed doin nothin so may aswell clean up the front calipers while there off and paint them and while I'm at it do the rears

So yea my list is getting bigger but I'm feeling good about this weekend just hope all goes to plan and I'll take shit loads of pictures as I go along as always