Mgtf04

I would PM the supplier and get their feedback. Maybe they know or have experience of what other buyers do.
Surely someone on here has experience with this?
Personally I would just replace any underlay with a modern material anyways. I used aqua filter material one time due t9 it’s qualities and carbon impregnating to kill off smells. Worked a treat and water dissipates with the form and make up of the material.

Hi
There’s a TF carpet upgrade bit in the how to section full of pictures that may prove useful..

Of course, will do..

I am going to add the wiring details and process used once it’s finished for anyone trying it themselves. It’ll take the pain out of it that I had to endure as not an expert ….
Appreciate some will hate this mod and want to stay original… each to their own..

Thanks David.
Sometimes I can’t find things as my eyes get in the way…

I've always not been happy with the plasticy feel of the switches in the cockpit and wanted something more MG like so I set about making changes.
The wiring was a headache but I got there and am very happy with the results so far. I had to adapt the window switches as the passenger one would not work with the TF wiring, so I simply added a one shot adaption to match the driver side and the wiring was reduced enough to work. Please excuse the heater switches as I'm still waiting for my stainless steel potentiometer switches from Italy. I've just attached these cooker ones whilst waiting.
I’ve changed all to blue LED too which looks cool in the dark.
I’ll post some images of a hard top too that I bought damaged cheap and modded up.
I had to cut away the switch housing and leave a edge to plastic weld the stainless steel panels to.

Mirror dinghy? I hope it’s not my old one I sold….it had more worm holes in the mast than a Swiss cheese.
I bought it, composted it in the garage for three years then sold it. A friend reminded me of a quote I was unaware of “owning a boat, you have the best two days of your life. The day you buy it and the day you sell it” ⛵️😵‍💫

Hi all

I have recently attempted to repair the Pektron CL relay and after successfully fitting a new one the CL remains dead. This car has had upgraded CL fitted to the doors by myself as it’s a 2004 115 . The wiring harness is compatible but assume that the Pektron now needs the CL activating…. To this end…..

I have given up on this route and want to keep costs down and will be fitting a cheap aftermarket CL kit instead.
This comes with the key fobs and wiring. I’m aware I’ll effectively have two fobs one for the immobiliser and one for CL but have no issues with this as the addition of CL is batter than the extra lump in me pants ( pardon me…)

My question is: the drivers door has two connectors. A six pin with six wires and a two pin with two wires.
Which of these connectors or wires go to the solenoid?
Is there a decent wiring diagram about for this area of the car?

Cheers

Just got a five litre can of waxoyl black from Halfords for 13.20!
20 quid off !!!
Be quick!