Sign In   Register
  • Page:
  • 1
  • 2

Topic

"init fail", the pc cannot connect with the car 3 years 7 months ago #194073

Yes, that's already on my mind, there are some options on eBay.....


There are 2 versions of the EPAS.
If you have an analogue milometer you will need the earlier version.
If you have a digital milometer you will need the later version.
You will be able to confirm part numbers on the Rimmer Brothers website.

Home to black Alfa Romeo 159 3.2 V6 Q4 ,green MGF VVC and red MG Maestro T16.

MG - the friendly marque.

Please Log in to join the conversation.

"init fail", the pc cannot connect with the car 3 years 6 months ago #194262

Hello again, I did get hold of another EPAS ECU with the same part number. Same results, no signal from the ECU to the pscan tool. I checked the pink diagnostic wire from the ECU-connector, via the diagnostic socket to the ende of the pScan cable (before interface). Connection ok. Any other idea?

Please Log in to join the conversation.

"init fail", the pc cannot connect with the car 3 years 5 months ago #194274

Check that the ECU is receiving power and a good earth.

Please Log in to join the conversation.

"init fail", the pc cannot connect with the car 3 years 5 months ago #194276

If you like you can send me one of the ECUs and I will power it up on the bench and get pscan talking to it.
You can then replicate the setup where you are and then compare what's different on the car.

Please Log in to join the conversation.

  • Page:
  • 1
  • 2
Moderators: pscan.uk
Time to create page: 0.089 seconds
© 2024 The-T-Bar.com All Rights Reserved. Hosted By SEBS IT