Sign In   Register
  • Hi to all Engine is running...!!! As I after a along time got a new coil into the system the sparkes became better but not by mush. However the car is running and yes the balancer on the crankshaft is wrong. The gentleman was right about that new is on order from Rimmer Brothers I assume as normal delivery from them to Norway takes 3-4 weeks. I therfore try to find someone in EU to get parts from. Rimmer Brother have supplyed me part for more then 10 years so ... before as UK ws in EU it was about 2 week maks. However I got a Delpin coil it works but the brackets do not fit one So bolt only...More steel work to be done...
    So car stopped about 1,5 years ago and Pscan was purchased. I believed I had diven empty but had half full tank the measuring of fuel worked.
    I had spark so new fuel pump. and rebuild of fuel pipes to get a pressure test outlet in on the system after the filter. pressure 2,2 to 2,3 bar NOT 3 bar but by clamping the return hose a little I had 4 bar. No start Pscan connected after it came. and it pointed out the crank sensor new sensor purchased and changed No start new battery No start. New plugs No start but after measuring all with a lamp I had one that sometime did and sometimes did not spark new order cap rotors leads all five. Now I do a mistake No new coil and No start. Now direkt ground of engine to battery and direkt 2 ground wires from ECU to battery direkt No start. New coil in place mounted up connected. All spark plugs out and groundet to battry with start cabels my boy crankt over with the new battri charger with start bost and now I had a spark that was stable. but not correct toward the ballaster wheel ok cam cover off Turing the engine all valve and pistons ture correct as I could see. Ok new banser order and next day plugs In boost on and turing the key. And IT Started. turd off and turn the key it started ok garage door open. For air and exhaust out it started. OK butAs I have trued for 1,5 years and AS I had the came cover off it did slell gas so I changed the oil and filter car started. cover on now but still have to bolt back gound wires and air filter etc. I can now not point out the probelem but the last was the coil and the car has had spark all the time.. But now the car runs... Thanks to all with Ideas.. I believed IT as the the new crank sensor or that I had the time belt jump...but after all change out and 3 weeks between orders and delivery of parts it has taken time.
    1. View Reply
    2. View Thread →
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
Unable to load tooltip content.
© 2024 The-T-Bar.com All Rights Reserved. Hosted By SEBS IT