Sign In   Register
  • Borgy created a new forum post in MGF/TF Pitstop
    2002 TF been stood for about three years before I bought it.
    Picked it up for peanuts as a non runner. Immobilizer out of sync and starter fuse corroded / blown.
    I bought the car as my 17 year old sons first car.
    Sorted most issues apart from the ABS light stays on.
    Checked all sensors, and the connectors are dry , with 1.6 k ohms resistance on each, and 0.7 volts AC when I spin the wheels, so they all look ok
    Took the connector of the pump, and all looks dry.

    As I had a problem with fuse 19 (the starter circuit fuse) i thought fuse 20 (ABS) might be a bit iffy also, but put a lamp into the side of fuse and lit both sides.

    So I would like to check everything from the ABS unit to make sure I have got a ground, live, and continuity all the way to the unit.

    For this, I could do with the pin outs. Or any other advice. I have trawled the forums but no more answers without PSCAN
    1. View Thread →
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
Unable to load tooltip content.
© 2024 The-T-Bar.com All Rights Reserved. Hosted By SEBS IT