Sign In   Register
  • I ended up buying one from mgfntfbits and it fitted straight on, I did replace the cat and rear box at the same time, but bought all three parts from different places (just to be awkward).. the fun bit was the fact the front O2 sensor is mounted in that section, in the crook where two pipes go into one.. I ended up using a grinder to free it (it being a Sunday and the chances of getting a replacement exactly zero) but in hindsight, I’d get a new one.. the issue most have with the section you’re replacing is that it’s too short, so the bend at the rear catches on the central lashing point under the car.. the mgfntf one ‘just’ fits, lastly I recommend prepping the mating faces with scotchbrite, preferably on a drill attachment.. mine had a dot of weld spatter on it which would have been annoying!
    Oh and I used hi temp silicone (just a wipe) gasket for the faces too, (touch wood) it’s been fine ever since! Some 3000 miles..


    Sent from my iPhone using Tapatalk
    1. View Reply
    2. View Thread →
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
Unable to load tooltip content.
© 2024 The-T-Bar.com All Rights Reserved. Hosted By SEBS IT