NigelOBB

julianfoulger wrote: wrote:

I thought I was there regarding a steady idle (875rpm, step 21) until I went for a spin today. After 15 minutes the steady idle I had was up to 1688rpm (albeit steady). Turn-off and then restarted - it adjusts back to circa 875rpm.

I got home, and following the advice above to the letter, disconnected the IACV and then adjusted the screw (both ways) but the RPM stayed on circa 1050rpm. I just do not seem to be able to get it down to 875rpm. Any thoughts?

On Pscan I get no error codes (other than the IACV because disconnected), I have already replaced the spark leads, coils, TPS, cam sensor, MAP (and the IACV). The throttle cable is as to should be (ie no pull on the cable when peddle not pressed).

Any ideas, please?

We just adjusted the screw on mine didn’t disconnect the IACV


Sent from my iPhone using Tapatalk