| Item | QTY, P/N and Description | From | To |
|---|---|---|---|
| 1 | RGG103680 - Arm assembly -lower rear Suspension |
2D600100 | |
| 2 | RBX10025 - Bush-front arm lower support |
2D600100 | |
| 3 | RGX100470 - Bush-transverse link hub |
2D600100 | |
| 4 | FB110101 - Bolt-flanged head - M10 x 50 |
2D600100 | |
| 5 | RYG100820 - Bolt-adhesive-patch - lower arm to hub |
2D600100 | |
| 6 | RYG10048 - Bolt-nylon-patch - lower arm to subframe |
2D600100 | |
| 7 | RGB100540 - Bar assembly -tie-bent rear Suspension |
2D600100 | |
| 8 | RGX100480 - Bush-tie rod mounting large | 2D600100 | |
| 9 | RYF100260 - Washer-plain -thick - front, 3.50mm |
2D600100 | |
| 9 | RYF100250 - Washer-plain -thick - rear, 2.50mm |
2D600100 | |
| 10 | FX112057 - Nut-flange - M12 |
2D600100 | |
| 11 | WJ112001 - Washer-plain lower arm to hub |
2D600100 | |
| 12 | RGB100361 - Bar assembly -anti-roll rear Suspension |
2D600100 | |
| 13 | RGD100180 - Link-anti roll bar rear
Suspension |
2D600100 | |
| 14 | 21A1230 - Bush |
2D600100 | |
| 15 | FAM5909 - Sleeve |
2D600100 | |
| 16 | FB110101 - Bolt-flanged head - M10 x 50 |
2D600100 | |
| 17 | FN110041 - Nut - M10 |
2D600100 | |
| 18 | EGP1714 - Clamp |
2D600100 | |
| 19 | RGX10006 - Bush-anti-roll bar - 18mm |
2D600100 | |
| 20 | FN108041 - Nut-flange - M8 |
2D600100 | |
| 20 | FN108047 - Nut-flange - M8 superceeded by FN108041 |
2D600100 | |
| 21 | RGZ100050 - Rod assembly -track control rear Suspension 2 of |
2D600100 | |
| 22 | RYG10048 - Bolt-nylon-patch 2 of |
2D600100 | |
| 23 | NY210047 - Locknut 2 of |
2D600100 | |
| 23 | NY210041 - Nut-lokut superceeded by NY210047 |
2D600100 | |
| 24 | RGU100370 - Bracket-anti-roll bar mounting
rear Suspension 2 of |
2D600100 | |
| 25 | RGU100231 - Bracket-anti-roll bar mounting
rear Suspension - LH |
2D600100 | |
| 25 | RGU100221 - Bracket-anti-roll bar mounting
rear Suspension - RH |
2D600100 | |
| 26 | FS110251 - Screw - M10 x 25 4 of |
2D600100 | |
| 27 | WA112081 - Washer-plain - M12 2 of |
2D600100 |