Sign In   Register
  • Page:
  • 1
  • 2

Topic

Re:How to fit LED Halo DRLs to my TF 9 years 9 months ago #145141

Bugger! Wish I had seen this before doing my own re the welded shrouds!
Oh well, I can report that the JB Weld glue is still holding the halos in place no worries!
Brilliant job either way.

Ken


Sent from my iPad using Tapatalk HD

Please Log in to join the conversation.

Re:How to fit LED Halo DRLs to my TF 9 years 9 months ago #145144

No consolation Ken but I only just finished this a few days ago in time for the Bromley Pageant today.....I am sure the JB Weld will be fine...and also sure it would have been easier for me to do it that way..What I didn't say was I trashed one set of lights doing it my way which I could have avoided using glue instead of wire.
"You can’t be a real country unless you have a beer and an airline – it helps if you have some kind of football team, or some nuclear weapons but at the very least you need a beer"
- Frank Zappa

Please Log in to join the conversation.

How to fit LED Halo DRLs to my TF 9 years 7 months ago #147606

A quick follow up to this thread...just passed the MOT test with these DRLs....a clean pass, no advisories.... :D :D
"You can’t be a real country unless you have a beer and an airline – it helps if you have some kind of football team, or some nuclear weapons but at the very least you need a beer"
- Frank Zappa

Please Log in to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.090 seconds
© 2024 The-T-Bar.com All Rights Reserved. Hosted By SEBS IT